Roxborough · at the mouth of Wissahickon Creek · c. 1686–c. 1856

Robeson SawmillRobeson Sawmill

Likely the first building of the whole Robeson works — a sawmill at the creek’s mouth that cut lumber for a young settlement, and outlived the dam that fed it

The Robeson Sawmill stood at the mouth of Wissahickon Creek in Roxborough, on the creek’s west bank just south of Ridge Road, where the creek runs down to the Schuylkill River. It was the northernmost of three mills that stood in a row on the west bank and drank from one mill race — the channel that carries a creek’s water to the mill wheels. First came the sawmill. Below it stood the nail factory, and below that, nearest the river, the rolling mill. The three were one works, but they were three different mills, and this is the sawmill’s story. It is not the grist mill, and it is not the rolling mill — the one Robeson building still standing, home to the Philadelphia Canoe Club today.

Nothing of the sawmill stands. The ground is parkland now, below the Ridge Avenue bridge, and no source read for this story reports any remains of it.

The mill that may have come first

Richard Townsend built a grist mill and a saw mill at the mouth of the Wissahickon between 1686 and 1689 — so Jane Mork Gibson writes in Workshop of the World. The standard accounts lead with the grist mill. Griffin Affel, in his study of the Robeson rolling mill for the Philadelphia Canoe Club, reasons the other way: the sawmill likely came first. It stood closest to the water, and once it was sawing, it could cut the lumber to build the corn mill. On that reasoning, the sawmill is the founding building of the whole Robeson complex.

In 1690 Townsend sold both mills to Andrew Robeson and Charles Saunders. The deeds call the holding the “Saw and Corn Mills.” The tax list of 1693 knows the firm as the “Robeson & Saunders Mill.”

On the maps

A sawmill stands near the creek’s mouth on the Zimmerman map of 1746. The map of the complex drawn in 1816 still lists it in the west-bank row. And the Robeson Estate plan of 1835–38 shows the mill race flowing under Ridge Road, the water first used by a “Saw Mill” on the south side of Ridge, and the sawmill’s tail race — the channel that carries water away from a wheel — running down into the mill pond that fed the rolling mill.

One map disagrees, and it is printed here as it stands. A map by the East Falls Historical Society — a modern map, not one drawn at the time — puts a sawmill north of Ridge Road. Affel doubts it: the ground there stands high above the creek, and a race and sluice gate are hard to picture at that height. The maps of 1746 and 1816 and the estate plan all put the sawmill south of Ridge, on the west bank, and that is where this story puts it.

One silence is worth noting. When the partners’ ground was divided by a writ of partition in 1702, the sawmill is not named in it — the writ describes the grist mills under one roof. The sawmill’s separate life goes on in the maps, not in that deed.

Water, measured in court

The lower dam fed the sawmill. Runkel, remembering about the year 1821 in an account written down in 1891, put it plainly: “The lower dam was built to supply the saw and grist mill on the left bank, and the upper one the grist mill on the right.” By 1821 a new dam had replaced the first dams, and the lower one was already falling out of use. Runkel thought it “might be done away with, with advantage to the appearance of the stream.”

The sawmill outlived its own obituary. In 1822, men measuring water for the Robesons’ lawsuits against the Schuylkill Navigation Company — the company whose Fairmount Dam had raised the river against the mills — gave the sawmill 121 inches of water. The rolling mill on the same race measured 596.5 inches, and the nail factory 63. The sawmill held about twice the nail factory’s water: a substantial sawmill by the standards of this creek. A mill still worth measuring in a fight over damages was a mill still at work — and its power is in the record at all only because it was evidence in that fight.

No sawyer, tenant, or miller of the sawmill is named in anything read for this story. It ran as one department of the Robeson works, under the same owners as the rest of the complex: the Robeson and Saunders partnership, then the Robeson heirs, then Peter Robeson until 1833, and his sons and son-in-law from 1833 to 1864. No count of its work survives either — no board feet, no logs sawn, in anything read.

The end

The sawmill was gone by about 1856. Affel’s study says of the sawmill and the nail factory together that they “last existed by c. 1856.” No fire, no sale, and no tearing-down of the sawmill is recorded in anything read. It simply leaves the record somewhere between the estate plan of 1835–38 and that bound of about 1856.

The setting of those years is documented, and it is printed here as setting, not as the sawmill’s own ending. The complex’s water was failing. The raisings of the Fairmount Dam in 1821 and 1843–44 drowned the mills’ tail races, and Jonathan Robeson’s suit of 1848 called the race “inoperative.” The small mills on the west bank died as the power died. Whether that is what ended the sawmill, no record read says.

No picture to show

This page carries no picture of the sawmill, and the reason is plain. No picture of it that can be freely shown was found. Captain Joshua Rowley Watson drew the iron-mills complex from the creek in 1816, in the sawmill’s last decades, and those drawings rest in his sketchbook at the New-York Historical Society — an archive whose permission this project did not seek, because it uses only pictures that are free to show without asking. So the sawmill’s page stands without a picture, rather than with one it has no right to use.

One more gap stands open. The likeliest paper source for the sawmill’s last years is Macfarlan’s 1949 typescript on the Wissahickon mills, kept in the Free Library’s Map Room. It exists only on paper, and this project works from the online record alone — so it stays unread, a permanent gap in this account.

Timeline

YearEventSource
1686–1689Richard Townsend builds a grist mill and a saw mill at the creek’s mouthGibson, Workshop of the World (1990)
1690Townsend sells both mills to Andrew Robeson and Charles Saunders; the deeds name the “Saw and Corn Mills”Gibson; deed abstracts in the Affel study
1693The tax list names the firm the “Robeson & Saunders Mill”Project index
1702The writ of partition divides the ground and does not name the sawmillAffel study
1746The Zimmerman map shows a sawmill near the creek’s mouthAffel study
c. 1821Runkel’s recollection: the lower dam, built for the saw and grist mill, is already falling out of useRunkel (1891), via the Affel study
1822Water measured for the Robeson lawsuits: the sawmill holds 121 inchesThe 1822 water measurements, from the Robeson lawsuits
1835–38The Robeson Estate plan shows the “Saw Mill” south of Ridge Road, its tail race running to the mill pondAffel study
c. 1856The sawmill and the nail factory “last existed by c. 1856”Affel study

The Cellar

The mill dossier behind this story (read)

  1. The project’s dossier for the Robeson Sawmill (DOSSIER-robeson-sawmill.md) — read in full: the seat and the map evidence (Zimmerman 1746; the 1816 listing; the Robeson Estate plan of 1835–38); Townsend’s building and the 1690 sale; the writ of partition’s silence in 1702; the 1822 water measurements; the end bound of about 1856; the placement conflict and the gaps, printed as they stand.

Accounts of the Robeson works (read)

  1. Griffin Affel, The History of the Robeson Rolling Mill in Fairmount Park (Philadelphia Canoe Club study, philacanoe.org) — read: the west-bank mill row and the shared race; the sawmill built first (his reasoning); the 1746 Zimmerman map; the 1835–38 Robeson Estate plan (sawmill south of Ridge, tail race to the mill pond); Runkel’s 1891 recollection of about 1821; the partition’s silence on the sawmill; “last existed by c. 1856” (sawmill and nail factory).
  2. Jane Mork Gibson, Workshop of the World (1990), Fairmount Park chapter — Townsend built a grist mill and a saw mill at the mouth of the Wissahickon between 1686–1689, and sold both to Robeson and Saunders in 1690 (workshopoftheworld.com).

Image records (checked)

  1. The project’s free-image hunt (FREE-IMAGES.md, no. 27) — no free image of the sawmill exists. The only located views are Captain Joshua Rowley Watson’s 1816 prints of the iron-mills complex, in his sketchbook at the New-York Historical Society (Object 1958.85); the reproductions on philacanoe.org are reference only and carry no license. The dossier’s repository check (November 16, 2026) found only the Society’s whole-book record published online — Sketchbook of Views of the Northeastern United States with 137 Folios, 1 blank, 1816; Foster’s catalogue (1997) assigns the individual drawings. Permission was not sought.

Project files

  1. The mills index (entry 2, Robeson Sawmill); DOSSIER-amos-jones.md §5 (the 1822 measurements: rolling mill 596.5 inches, sawmill 121 inches, nail factory 63 inches); the master figure list, entries 27 and 28 (Richard Townsend; Charles Saunders).

A note on sources. This account was researched online from the public record — deeds, maps, insurance surveys, directories, newspapers, and court reports — and every fact in it is tied to a source in the bibliography. Records from the eighteenth and nineteenth centuries are imperfect: names were spelled several ways, ages drift from census to census, and officials made mistakes. Where two records disagree, this account prints both rather than choosing silently; where an identification rests on converging evidence instead of a single document, it says so in the text. If you hold a record that corrects or extends this account, the project welcomes it — corrections make the record better.

Back to The Mills

Back Home