The Robeson Nail Factory stood on the west bank of Wissahickon Creek, right where the creek meets the Schuylkill River. It stood south of Ridge Road, in a row of three mills that shared one mill race: the sawmill above it, and the rolling mill below it, nearest the river. It was not a mill on its own. It was one department of the Robeson iron works at the creek mouth — a different seat from the Robeson grist mill, and a different building from the rolling mill that still stands at the creek mouth today, the home of the Philadelphia Canoe Club.
Today nothing of the nail factory is there. The creek mouth is parkland, and no record read for this story reports any remains of it.
One works, three mills
The nail factory has no deed history of its own in anything read. It lived as part of the works around it, and its documented life is the life of the complex. The Robeson works at the creek mouth run back to Robeson & Saunders in 1691, and then to the Robeson heirs. A listing from 1816 names the three west-bank mills in their row — sawmill, nail factory, rolling mill — and the 1820 Census of Manufactures treats the rolling and slitting mill and the nail factory together, as one establishment: “the Roxborough works.”
The year the record opens
In 1820 the owner was Peter Robeson. The works were rented by John Moore, and Moore carried them on through an agent: the census return is signed on August 16, 1820, by James Davis, agent, for John Moore. Moore was Peter Robeson’s son-in-law, married to Catherine Robeson. When Peter Robeson died in 1833, John and Catherine Moore came to own a one-third part of the works.
How the nails were made
The 1820 return describes the nail factory closely — the fullest picture any creek-mouth mill gets. Its raw material was hoop iron: 82 tons a year, costing $10,660. Out of it came nails and brads, sold at 8¾ cents a pound. The return’s figures give 82 tons of nails and brads a year — the hoop iron in, the nails out.
The machinery was modern for a country shop: two patent machines that cut and headed nails at the same operation, one side machine for cutting brads and points, and four tools for heading nails by hand.
Three men worked there steadily, and at times three others headed nails. The hand tools were worked by borrowed men. One was worked now and then by the man on the side machine; the other three were worked by hands from the rolling and slitting mill “only when they have nothing to do therein.” The nail shop ran, in part, on the rolling mill’s idle hours.
The money tells the same story. The capital in the nail factory was $3,000 — the same as the rolling mill’s. But its wages came to $1,497 a year, against the rolling mill’s $867: nearly double. Its other running costs — the return’s “contingent expenses” — came to $1,820. Heading nails by hand took men, and men took wages. Nails were the labour business of the works; rolling iron was the power business.
The water tells it from the other side. In measurements taken in 1822, the nail factory drew 63 inches of water — the smallest share of the three west-bank mills, against the sawmill’s 121 inches and the rolling mill’s 596.5.
And trade was already hard. The return’s general remarks complain that demand had “been dull for the last year occasioned by the importation of large quantities of foreign Iron.” A water-powered nail shop in Roxborough was competing against imported nails in 1820.
Older than the Iron Act
The creek-mouth iron works were old by 1820 — older than the law that tried to stop works like them. In 1750, Parliament passed the Iron Act, which forbade the building of new slitting mills in the colonies. The Robeson works were already standing. The Affel study sets the creek works in that fight, quoting Swank’s history of iron making on John Taylor’s mill, whose storekeeper boasted in Liverpool that he could buy nails at Taylor’s mill cheaper than the English quoted. The little nail shop at the creek mouth belonged to that generation of American iron works.
No picture to show
No picture of the nail factory that can be shown survives for this page, and the reason is plain. Captain Joshua Rowley Watson drew the iron mills from the creek in 1816, while the nail factory stood; his prints are the one likeness of the works from its own time. The drawings sit in his sketchbook at the New-York Historical Society, and using them takes the Society’s permission. This project uses only pictures that can be used without asking anyone — and no one asked. So this page carries no picture of the factory.
The end
After 1820, the record goes quiet. No source read for this story names the nail factory again until the Affel study’s closing bound: the sawmill and the nail factory “last existed by c. 1856” — by about 1856.
The works had later tenants of record. In the spring of 1830, Peter Robeson advertised the water power to let, with the rolling mill “formerly occupied.” Amos Jones held the rolling mill at a date the record does not fix. In 1848 an unnamed tenant was grinding logwood — wood ground for dyes — in the rolling mill. Those tenancies are documented for the rolling mill. Whether any of those men also worked the nail factory, nothing read says.
No fire, sale, or demolition is recorded for the nail factory. The setting of its end is context, and it is printed as context: the raisings of the Fairmount Dam in 1821 and 1843–44 were drowning the works’ tail races in those decades, and by 1848 the rolling mill was grinding dye wood. The iron works at the creek mouth were ending. The nail factory’s disappearance by about 1856 belongs to that ending — but no source ties the event to this building.
One paper source might tell more: Macfarlan’s 1949 typescript on the Wissahickon mills, held at the Free Library’s Map Room. It exists on paper only, and this project reads online. It stands here as a named gap.
Timeline
| Year | Event | Source |
|---|---|---|
| 1691 | The Robeson works at the creek mouth begin with Robeson & Saunders | Affel study |
| 1750 | Parliament’s Iron Act forbids new slitting mills in the colonies; the creek works already stand | Affel study, quoting Swank |
| 1816 | The three west-bank mills are listed in their row: sawmill, nail factory, rolling mill | Affel study |
| 1820 | The Census of Manufactures return for “the Roxborough works”: Peter Robeson owner, John Moore tenant | 1820 Census of Manufactures return, in the Affel study |
| 1822 | Water measured: the nail factory draws 63 inches, the smallest of the three mills | Project files (DOSSIER-amos-jones.md §5) |
| 1833 | Peter Robeson dies; John and Catherine Moore come to own a one-third part of the works | Affel study |
| c. 1856 | The sawmill and nail factory “last existed by c. 1856” | Affel study |

